How To Fix A Wobbly Chair

How To Fix A Wobbly Chair!

Are you going to arrange a party and do you need more chairs for this event? But some of the chairs (may be a wooded chair) are wobbly; then you can fix them a chair leg or chair legs and use them at your event; it will save your money. Here are some details about the wobbly chair; you can quickly repair your chair leg or chair legs by using it.

Wobbling chairs can be a nuisance, and most people try to hold on to them as long as they can. However, the older they get, the more unstable they become.

If you’re tired of your (wooden) chair rocking back and forth, there is an easy solution to fix your wobbly chair. All you need is some wood glue and some wood screws. By using this, we will show you how to fix a wobbly chair.

how to fix a wobbly chair by

What Causes A Chair To Wobble

  • Loose leg hardware
  • Uneven legs
  • Loose joints
  • Bent or warped pieces of wood
  • Loose joints or screws
  • Broken pieces of wood
  • Corrosion on leg hardware
  • Old rubber mallet


Loose Leg Hardware

You can fix chair wobbles caused by loose or missing hardware by tightening the bolts, screws, nuts, and washers that hold your wobbly wooden chair together. 

If you need to buy replacement hardware, purchase one that match to your chair seat existing hardware as closely as possible. Tighten the bolts, screws, nuts, and washers with a screwdriver or drill.

Uneven Legs

If your chair has been assembled properly from the beginning, uneven legs are usually caused by settling. As time goes on, particles will loosen from wooden chairs’ furniture. The legs will sink slightly out of position in a few weeks, depending on where you live and how frequently your chair is used.

Use a leveler to make all four legs even with one another.

Loose Joints

If tightening the hardware doesn’t fix your wobbly chair, check for a loose joint. Loose joint is usually caused by overloading the chair. If someone sits down on a chair that’s missing its leg or sitting on it at an odd angle, it will cause the joint to loosen. The longer the legs dangle, the worse they become.

Apply excess glue (new glue) to each piece of wood and clamp them tightly together.

Bent Or Warped Pieces Of Wood

If your chair is made from a bent or warped piece of wood, there isn’t much you can do to fix it. In this case, the only solution is to purchase a new chair. If you have an old wooden chair passed down from generations, ask someone knowledgeable about woodworking to check it out.

Sometimes, the chair’s warp can be fixed easily. If your legs are only slightly bent, you might hold them in place by placing a heavy object on top of them while they dry. However, if the chair has been warped for some time, there isn’t much that can be done step by step instructions.

Loose Joints Or Screws Holding

how to fix a wobbly chair by

If you know your chair is built from quality pieces of wood and assembled correctly, the problem may be loose joints small nails. Sometimes, over time a screw will become loose, or a joint will give way to show signs of wear. All you need to do is tighten the screws with an appropriate screwdriver if this is the case usually in most chairs.

If the screws do not tighten the joint, you’ll need to replace it with a new one. You can buy chair joints at your local hardware store. However, if your screws won’t tighten and you don’t know how to fix joints, call your local handyman or furniture repair shop for help.

The same goes for loose screws; call a handyperson if you don’t know how to fix them.

Broken Pieces Of Wood

If your legs are broken or split, they can be fixed with tape, glue and clamps. Put some wood glue on the split pieces and clamp them tight until the glue dries. After that, you won’t notice any unless you are a skilled woodworker, purchasing a new chair is your best solution.

Corrosion On Leg Hardware

how to fix a wobbly chair by

If your chair’s leg hardware is corroded with rust, you’ll need to repaint it. Remove the bolts, nuts or screws that hold the metal parts of your chair together and paint them with a metal primer. After this dries, spray the pieces with flat black paint. Then reassemble the chair, following the proper assembly instructions.

Once you’ve removed the corroded parts of your chair that are causing it to wobble, give it a good sanding and refinish the wood.

Preventive Measures For A Wobbly Chair

It is advisable to tightly screw all the furniture pieces together to prevent wobbly chairs.

Wobbly Chair: Permanent Solution

If your chair wobbles because of broken legs, you can easily fix it by replacing those broken legs with new ones. All you’ll need is patience and some extra money for buying those replacement parts. 

You can easily get replacement chair legs online, but make sure you are purchasing them from a reliable source to avoid buying substandard parts. This is an easier option compared to taking apart the whole chair and then putting it back together again.

If your wood furniture is still in good condition, try removing the wobbly legs and re-screwing them tighter.If these methods don’t work, you should replace the broken pieces with new ones. There are different kinds of legs you can use to replace your old wobbly legs.

You can choose metal or wooden legs for this purpose.Alternatively, if the chair is still in good condition and there’s no damage to other parts of the chair, you can sand down the wobbly legs and refinish them.

How To Fix a Wobbly Dining Room Table

how to fix a wobbly chair by

A wobbly table’s top might be loose or just not fit properly on its base, so it rocks back and forth when pressure is applied to any corner of the table. If the table’s top rocks, your first action should be to press down on it gently.

If this helps fix the wobble temporarily, try applying car wax to the table’s legs, so they connect more firmly with the tabletop. If these quick fixes don’t work, you have few options. You can purchase new sliders for your table or get rid of the wobble by sanding and refinishing it.

If you determine that none of these options will work for your particular table, there is a chance that the tabletop itself is warped and needs to be replaced. If this happens, call a local handyman or furniture repair shop.

What Are The Cons Of Wobbly Chair

how to fix a wobbly chair by

They can be extremely annoying and uncomfortable.

It has been found that a wobbly chair increase the chances of serious injuries when they tip over.

The chair might look unprofessional in an office, restaurant or hotel because it doesn’t perform its function properly and will affect the overall appearance of your place.

Frequent use can loosen the screws on the chair, leading to danger

As opposed to some other types of furniture problems, Wobbly chairs are relatively easy solutions for something that is so annoying and problematic. By following our guide, you’ll see a noticeable difference between your wobbly chairs and a properly assembled one.


You can fix a wobbly chair by tightening the bolts, screws, nuts and washers that hold your chair together or using all-purpose wood glue to reattach any loose joints in the frame. 

If you have only recently purchased the chair, you might be able to fix it by placing heavy objects on top of the legs while they dry. However, if your chair is made from a bent or warped piece of wood, there isn’t much that can be done to fix it.