How To Fix An Office Chair That Won’t Stay Up

How To Fix An Office Chair That Won’t Stay Up!

The one thing that you need to know is that office chairs are heavy.

They can be really hard to move around, which is why it’s important to assemble them when they first arrive at your office properly.

This article will provide some tips on how to fix a chair that won’t stay up by giving you a few different methods for tightening the bolts and screws on the underside of the seat base of desk chairs.

Complete procedure on how to fix an office chair that won’t stay up:

Check The Screws Around The Chair

how to make office chair stop turning by bestchairshop.com

Be sure to check the screws around the chair’s base, too. Sometimes they get loose over time, and that can cause a major problem with an office chair not staying up when you sit in it.

If your chair won’t stay up when you’re seated at your desk, then tighten these bolts by hand or use an adjustable wrench (chair saver kit) to get them as tight as possible on a sinking desk chair.

Extra screws can be found at your local hardware store, and they’re not expensive to purchase, so it’s always best to have some extras on hand just in case one gets lost or stripped out by accident during installation of the office chair.

If you don’t feel comfortable tightening these bolts with an adjustable wrench, then ask your co-worker or supervisor if they can do this for you.

Make Sure The Surface Is Flat

what office chair should I buy by bestchairshop.com

Another thing that you’ll want to check is whether or not there are any objects on the floor near the wheelbase, especially if your chair isn’t rolling around as it should work properly.

Make sure to pick up anything from under the desk so that nothing can get in between the wheels and prevent them from spinning freely when you try adjusting yourself with the office chair.

If your office chair is sitting on the carpet, it’s also important to check the floor for any ties or mats that might prevent the wheels from moving as they should.

Sometimes these can get wrapped around a wheel and cause an issue with how well your office chair moves when you want to move yourself up to better height length in the seat base.

You’ll also want to check that there aren’t any ties or mats on the wheels, which may prevent them from spinning freely before trying to adjust yourself up in the seat base.

To fix this, you’ll want to remove these ties or mats from the wheels so that they don’t get in between the chair’s wheels and your floor when trying to adjust yourself up higher due to which an office chair sink. 

Check For Broken Wheel Or Other Damage

How to fix an office chair that won't stay up by bestchairshop.com

It’s also important to check the wheels or chair cylinder for any damage. Sometimes a wheel can get broken or damaged from constantly rubbing against the floor when you’re adjusting yourself up higher in the seat base of the office chair cylinder, and that could prevent (gas lift cylinder) a chair from staying up as needed.

To fix this issue, you’ll want to check the wheels and look for any damage that might be keeping them from rolling freely when you need your office chair to stay up for a preferred height.

If there is a broken wheel base, this will need to be replaced with a new one so it can perform as expected.

Once this is done, tighten all of the bolts on the underside of the seat base again, making sure they’re as tight as possible for a chair sinking.

If there isn’t any damage to the wheels themselves, then you can replace a broken wheel with a new one and tighten all of the bolts on the underside of the seat base once more before trying it out for yourself to see if this resolved your issue of wrong height in a chair sinking.

Try Adjusting Your Height Setting

what do the levers on my office chair do by bestchairshop.com

If your sinking chair has a height setting, then you’ll want to make sure that this is set at the proper level and isn’t causing an issue with it staying down which may be due to the nitrogen gas chair’s cylinder.

To fix this issue, you’ll want to make sure that your seat base is at the proper height for where you’re sitting and not any higher than what’s expected from someone of your size. This will help ensure that your office chair can stay up properly (permanent solution) when trying to adjust yourself up in the seat base at the desired height.

If you’re at a perfect height, then it’s possible that the chair is just older and isn’t able to keep itself locked into place when trying to slide or move up higher than where it’s set. In this case, try getting your hands on an office chair about half your right height like maybe a chair for someone who’s around five feet tall instead of six feet or taller.

This can help resolve an issue where your chair is staying down because it’s older and just doesn’t have the same strength in its seat base as a newer office chair would which is a common issue.

If you don’t want to get a new one, then the second method might be getting your hands on and replacing an anti-fatigue mat under where your feet will sit while working at your desk so that your feet aren’t constantly pushing down on the same area over and over again.

This will help reduce some of the pressure that might otherwise cause your office chair to stay down because it’s older or just isn’t as powerful compared to what you’d expect from a brand new chair.

If none of these options works, then this could be an indicator that you should just get a new computer chair altogether. There’s no use trying to fix it if there’s nothing wrong with the wheels or anything else because your best bet might be getting something entirely different that can perform at its full potential.

You want to remove these ties or mats from the wheels so that they don’t get in between the wheel and the holes that will keep it from turning freely. If you have a mat or tie wrapped around your wheel, then this can cause an issue with keeping your office chair from staying up when trying to adjust yourself in its seat base because the wheel won’t be able to spin properly.

To fix this problem, remove any ties or mats that may be wrapped around your wheel and give it a push to see if this helped. If you don’t have any ties or mats, then try replacing the wheels with new ones to make sure that they’re not causing an issue. Sometimes wheels will wear down over time, so you might need to get some replacements instead of trying other things to fix the problem.

Try Using WD-40 Or Another Lubricant

how to fix an office chair that won't stay up by bestchairshop.com

If your sinking chair won’t stay up when you want it to, then try the suggestions above one by one until you find out what works for your situation.

Sometimes, older chairs will wear down over time due to metal cylinder and not have as much power in their seat bases as they used to. Fixing this issue of gas cylinder might require getting new ring wheels or possibly a new chair entirely for for full function on most models of chairs.

If all else fails, then give your wheels a good lubricant to see if that helps them work more smoothly and allows you to stay up in the seat base with ease.

This is another way of fixing a sinking chair that won’t stay up when trying to adjust yourself in its seat base unless it’s worn down over time.

There are a number of different ways to resolve this problem, so you shouldn’t have too much trouble figuring (irritating particles) out what works for your sinking office chair and how it can be fixed properly.

Conclusion

How to repair an ergonomic chair that won’t stay up? I believe you’ve covered the most basic and most accessible repairs (chair riser) in the event of an issue.